Komatsu — 3.10.3 HYDRAULIC OIL WARM-UP

3.10 STARTING THE ENGINE OPERATION Hydraulic Oil Viscosity and Temperature Chart *1) Temperature values for new oil (freshly filled in). *2) Temperature values for used oil. This temperature value has to be adjusted when the viscosity of the hydraulic oil has decreased by 10 to 12 percent compared with new oil. The determination of the hydraulic oil viscosity should be carried out in the course of the regular oil analysis procedure. REMARK The starting and operating temperatures in the above chart depend on the hydraulic oil viscosity grade used in the system. See decal in the operator's cab for viscosity grade of the factory oil filling. For example:

Hydraulic system filled with VG 22 viscosity grade oil. 1. Lowest permissible starting temperature (ambient tempera- ture): -20 ° C, see column "1" 2. Operating temperature: min. + 8 ° C max. + 55° C, see column ”2” 192 Rated viscosity at 40° C of hydraulic oil grade: Starting temperature (max. 1000 cSt) -1- Operating range (100 - 10 cSt) -2- ISO VG °C °C Shell Tellus Arctic 32 *1) - 32 10 - 85 Shell Tellus Arctic 32 *2) - 34 5 - 81 HLP 22 -20 8 - 55 HLP 32 -14 16 - 70 HLP 46 -6 25 - 80 HLP 68 0 32 - 85 HLP 100 +5 39 - 85