OPERATION 3.16 STOPPING THE ENGINE 3.16.1 RELIEVE PRESSURE IN THE HYDRAULIC SYSTEM With the engine at standstill and main switch (1) in ON posi- tion, move all controls for working attachment and crawlers several times through all shift positions to relieve the pres- sure in the hydraulic system. The necessary oil pressure for shifting the spools of the main control valves is provided by a pressure accumulator in the pilot oil circuit. NOTICE The pressure accumulator in the pilot oil circuit serves also for lowering a raised working attachment to the ground with the engine at standstill.
If, for example, the engine stalls with the working attachment in a raised position, lowering of the working attachment is possible by operating the respective control lever. 6. Set main switch key (1) to ”0” position and remove. NOTICE After switching OFF the main key switch in the Operator’s cab, wait at least 3 minutes before switching OFF the battery main switches. The Vehicle Health Monitoring System (VHMS) needs this period for saving data. If batteries are switched OFF before this time period is over, data will be lost. 7. Set lock lever (9) fully to the rear in LOCKED position. 8. Switch off the battery main switches and remove keys. 217 CAUTION CAUTION