Komatsu — 4.3.2 FLUIDS AND LUBRICANTS FOR MODERATE AND HOT CLIMATES

4.3 FLUIDS AND LUBRICANTS MAINTENANCE 4.3.2 FLUIDS AND LUBRICANTS FOR MODERATE AND HOT CLIMATES *1) DO NOT mix ZINC-FREE Hydraulic oils with Hydraulic oils containing Zinc. DO NOT mix Mineral Hydraulic oils with Synthetic Hydraulic oils. Mixing of the above oils, will reduce anti wear properties and oxidation stability of the oil. Quick plugging of the oil filters in the hydraulic system will occur. NOTICE *2) Refer to the chart GEAR OILS filed in volume 2 binder for the released gear oil qualities and viscosity grades. *3) Brake housings of swing gears manufactured by L&S have no separate oil compartment, as brake disks are lubricated by splash oil from gear box.

The lubricating instructions in this book refer to the recommended grade specifications. Damages caused by using lubricants other than specified are not covered by the manufacturer's warranty. 266 Point of Lubrication Lubricant Ambient Temperature °C Viscosity Grades Quality Grades DIN/API Engines Refer to ENGINE OPERATION AND MAINTENANCE MANUAL for Specifications of Engine Oil, Coolant and Fuel.

Hydraulic System Hydraulic oil HLP or HLPD with ZINC anti-wear additives *1) - 20 to + 11 22 DIN 51524 T.2 and T.3-HLP -14 to + 21 32 - 6 to + 31 46 0 to + 40 68 + 5 to + 48 100 Travel gears, Final drives and Swing gears Gear oil CLP *2) -15 to + 50 CLP 220 DIN 51517 3 - CLP Brake housings and Motor adapter hous- ings of Travel Gears and Swing Gears *3) Engine oil all SAE 10 or Hydraulic oil HLP 32 DIN 51524T.2 and T.3- HLP PTO’s (Pump distrib- utor gears) Gear oil CLP *2) -15 to + 50 CLP 150 DIN 51517 3 - CLP Pump drive shaft housings on PTO Hydraulic oil all HLP 32 DIN 51524T.2 and T.3- HLP Fan bearing hous- ings of Radiator and Hydraulic oil coolers Gear oil CLP all CLP 220 DIN 51517 3 - CLP