Komatsu — 4.3.2 FLUIDS AND LUBRICANTS FOR MODERATE AND HOT CLIMATES

MAINTENANCE 4.3 FLUIDS AND LUBRICANTS NOTICE The Air Conditioning must be filled with refrigerant ”R134a” through authorized Service Specialists only. DO NOT use refrigerant ”R12”, otherwise serious damage on system com- ponents could occur. The lubrication oil for the refrigerant compressor must be compatible with ”R134a” refrigerant. 267 Point of Lubrication Lubricant Ambient Temperature °C Viscosity Grades Quality Grades DIN/API Grease Fittings (manual lubrication) Multi-Purpose Grease ”MPG” Refer to the Lubricant Chart in volume 2 binder for the recommended Multi-Purpose Greases. The part numbers of recommended Multi- Purpose Greases are listed in the Parts Catalog.

Central Lubrication System Swing Circle Teeth (manual lubrication) Adhesive Lubricant Refer to PARTS & SERVICE NEWS, Bulletin No. AH00519 in volume 2 binder for the recommended Adhesive Lubricants. The part numbers of the recommended Adhesive Lubricants are listed in the Parts Catalog. Swing Circle Pinion Lubrication System Track rollers, Carrier rollers and Idler wheels Gear oil ”CLP" all CLP 220 DIN 51517 3 CLP Flexible couplings Engine oil API all SAE 15W-40 API Category CG-4SH Air conditioning system Refrigerant R 134a REMARK The Air Conditioning is prepared for Refrigerant ”R134a” only. Observe Notice below. Refrigerant compressor Special oil See Note below.