Komatsu — 3.2.10 ENGINE OIL MANAGEMENT SYSTEM

3.2 CONSTRUCTION OF THE SHOVEL OPERATION Oil Burning System "Centinel" combined with Oil Supply System "Reserve" Legend for illust.

Z 21473 (schematic illustration) (1) Engine oil reserve tank (10) Fuel/lube oil blend (2) Oil filter (11) System malfunction indicator (3) Pump unit (12) Oil level gauge (4) Suction oil to reserve tank (13) Oil withdrawal tube (5) Supply oil from tank to oil pan (14) Withdrawal adapter plate (6) Engine oil pump (A) Oil level with engine running (7) Main oil rifle (B) Control point for filling / withdrawal (8) Oil control valve (C) Roll or tilt oil level (9) Centinel Control Module (CCM) Brief description of system function The "Centinel" system is a continuous oil replacement system of electromechanical design and can extend oil and filter change intervals through continuous oil exchange.

This is accomplished by injecting engine oil at a controlled rate, proportional to fuel con- sumed, into the fuel system for consumption. Make-up oil is intro- duced into the engine by the oil supply system "Reserve", maintaining an optimal engine oil level. 76