MAN — Removing and installing turbocharger

Removing and installing turbocharger Fig. 5 Remove the four (self-locking) nuts from the turbo- charger (width across flats: 17 mm). Remove turbocharger. Note: Ensure meticulous cleanliness when putt- ing the turbocharger aside to prevent dirt and foreign matter from penetrating into the interior of the turbocharger. 5 Installing turbocharger Fig. 6 The turbocharger is assembled in reverse order. New seals and new self-locking nuts are to be used for reassembly. Before connecting up the oil supply line, fill bearing housing up with clean engine oil. 6 Fig. 7 Connect up charge-air pipes. Check all connections for leaks and tension. Note: Leaky charge-air pipes cause charge-air pressure loss.

This results in the formation of black smoke and poor performance. Caution: Comply with instructions for masking unions on pressurised oil and fuel pipes (see page 3). 7 99