MAN — Removing and installing intercooler

Removing and installing intercooler D Drain coolant, see page 49 D Remove heat exchanger, see page 61 Fig. 1 Remove intercooler complete with the flow gov- ernor for charge-air cooling water, with the glow plugs for the intake air preheater, with the charge- air elbow and with the Y-pipe (eg for making the injection pump accessible). 1 Fig. 2 Remove the bolts from the flanges on the pipe connections. Remove the hose for the aneroid device connec- tion. 2 Fig. 3 Remove the mounting bolts from the bracket. 3 Remove the connecting bolts from the charge−air elbow to the intake pipes. Take off intercooler. Fig. 4 Danger: The intercooler is heavy. Use lifting gear or work with helper.

Attachment is to be carried out in reverse se- quence. Use new seals. 4 102