Exchanging charge-air pressure relief valve Fig. 1 D 2840 LE 403 and D 2842 LE 404 engines are equipped with a charge-air pressure relief valve. Its task is to offset charge-air differences between the individual cylinder banks in engines with cylin- der bank cutout and intercooler separated on the air side. The intercooler separation on the air side ensures that in low-load operation the bank fired is supplied with a sufficient quantity of combustion air. 1 Fig. 2 If charge-air pressure relief valves are defective (diaphragm leaky) charge air emerges from the relief bore (arrow). 2 Fig. 3 Exchange defective charge-air pressure relief valve assembly complete.
Remove mounting bolts (10 mm) and take off valve. The installation is carried out in reverse sequence. Clean sealing face beforehand, coating it with “CURIL” sealing agent. 3 103