Removing and installing cylinder head Removing cylinder head D Drain coolant, see page 49 D Remove injection lines, see page 32 D Remove injectors, see page 40 Note: The intake and exhaust pipes need not be detached for removing the cylinder head. Fig. 1 Take off the cylinder head covers (13 mm). 1 Note: On engines recently manufactured the valve covers are fastened with Torx bolts for which an E12 − Ѕ ” wrench is required. Fig. 2 Back off valve adjusting screws. Loosen mounting bolts of rocker arm bracket (17mm). 2 Fig. 3 Remove rocker arm bracket. 3 Fig. 4 Take out push rods. 4 104