MAN — Removing and installing cylinder head

Removing and installing cylinder head Fig. 12 Check push rods for distortion. When inserting the push rods ensure that they fit into the seat of the valve tappet. Put rocker arms and push rods in place. Screw in the mounting bolts without washers and tighten them slightly. Align rocker arms to valves. Tighten the mounting bolts to the specified torque. Note: Use only M10x70 mounting bolts (property class 10.9). 12 Fig. 13 Fit new seals between the cylinder head and the intake and exhaust pipes. Tighten the mounting bolts on the intake and ex- haust pipes to the specified torque. 13 Fig. 14 Set valve clearance. Fit injection nozzle. Mount cylinder head cover with new seal.

Fill up with coolant. 14 107