MAN — Setting valve clearance

Setting valve clearance Fig. 5 D 2842 LE 404 7 1 Valves are in crossover in cylinder 8 1 12 5 8 3 10 6 7 2 11 4 9 6 7 2 11 4 9 1 12 5 8 3 10 9 11 12 2 Set valves in the cylinder 10 9 10 3 11 8 76 5432 1 4 12 5 6 5 Fig. 6 Push feeler gauge between valve stem and rocker arm. Loosen lock nut (17 mm) and turn adjusting screw with screwdriver until feeler gauge can be moved with slight resistance. Tighten lock nut to the specified torque (see “Engineering S Data S Setting values”) using screw- driver to prevent adjusting screw from turning. Check clearance again. 6 Fig. 7 Setting the valves can be considerably facilitated by using the valve setting tool. 7 Fig.

8 Refit cylinder head covers with new gaskets. 8 110