MAN — Removing and installing valves

Removing and installing valves Fig. 8 Insert discs and valve springs. The word “TOP” facing upwards, the tight coils facing downwards. Replace damaged or weak springs. 8 7 Fit valve discs and tapered elements. 6 1 Valve 2 Valve stem seal (on the inlet valve only) 3 Washer 4 Outer valve spring 5 Washer 6 Inner valve spring 7 Spring retainer 8 Tapered element 5 4 3 2 1 9 Measuring valve recess Figs. 9 and 10 Place dial gauge holder and dial gauge on cylinder head so that the dial gauge tip contacts the cylin- der head and set dial gauge to “0”. Slew dial gauge towards the valve disc and read off retrusion. If necessary, change valve and/or valve seat insert. 10 11 114