MAN — Removing and installing camshaft

Removing and installing camshaft Installing camshaft Fig. 5 The angle drive on the front side of the engine is driven by the camshaft. Before reinstalling camshaft remove angle drive. Note: If the angle drive is installed the driving dog pressed into the camshaft cannot en- gage in the angle drive. 5 Fig. 6 Apply oil to camshaft and insert it carefully. 6 Fig. 7 Ensure that the marks on the crankshaft and the camshaft gear match. 7 Bild 8 If the camshaft cover has been removed from the crankcase, it is to be inserted as follows: D Remove grease from bore and cover. D Apply “Hylomar” sealing agent to bore and cover including chamfer.

D Carefully press in cover, taking care not to tilt it so that it jams. D Ensure that there is no oil leakage. 8 126