MAN — Removing, installing and changing piston rings

Removing, installing and changing piston rings Installing piston rings Figs. 5 and 6 Use piston ring pliers to place piston rings in the correct piston ring grooves (“TOP” mark facing up- wards). TOP 5 6 Checking piston ring axial clearance Fig. 7 Use feeler gauge to ascertain the piston ring clear- ance at several points in each groove. For this purpose the piston ring is to be fully pressed into the piston ring groove at the point to be measured. The pistons must be replaced if the clearance ascertained is too large. For axial clearance see “Engineering S Data S Set- ting values” 7 140