MAN — Removing and attaching alternator

Removing and attaching alternator Removing alternator D Relax alternator V−belt and take it off the pulley; see page 149 D Disconnect earth cable from battery Fig. 1 Disconnect connectors B+ and B− from alternator. Disconnect connectors D+ and W (plug) from alter- nator. 1 Fig. 2 Remove the mounting bolts from the front of the bracket. 2 Fig. 3 Remove the mounting bolts from the rear of the bracket and take off alternator. Attaching alternator The alternator is attached in reverse sequence; do not mix up the cable connectors. Check whether the V−belt pulleys are aligned with one another, if necessary adjusting them. Tighten the mounting bolts to specified torque. Tension V-belt.

Once the alternator is attached, check whether it functions faultlessly. 3 147