Removing and installing fuel injectors Removing fuel injectors D Remove injection lines, see page 32 Fig. 1 Remove leakage fuel return lines. Remove pressure screw from fuel injector using a pin spanner. Note: Owing to the poor accessibility of the injec- tion nozzles of the front−mounted cylin- ders, it may be advantageous to remove the valve covers before the injection nozzles are removed and installed. 1 Fig. 2 For this purpose use a ring spanner with a fixing screw (special tool). 2 Fig. 3 Where injection nozzles are more readily access- ible, screw inertia extractor on to nozzle holder and knock out nozzle holder. 3 Fig. 4 Take out injector and injector seal.
Check and repair injector, see page 42. 4 40