MAN — Einspritzpumpe aus- und einbauen

Removing and installing injection pump Additional notes on removing the in- jection pump from D 2848 LE 403 en- gines To reach the mounting bolts of the injection pump, the holder for the intercooler support (arrow in Fig. 1) must be removed: From engine no. 8950 001 onwards Figs. 1 and 2 Remove holder for intercooler from left-hand side of engine. Remove the mounting bolts from the holder of the intercooler support (arrow) and pull holder out to- wards the rear. For this purpose the holder for the intercooler sup- port has a slot at one end. 1 2 Up to engine no. 8949 999 Figs. 3 and 4 To remove the holder for the intercooler support, the intercooler must be detached.

D Drain coolant, see page 49 D Remove heat exchanger, see page 61 D Remove intercooler, see page 102 The holder for the intercooler support does not yet have a slot. Note: To facilitate the removal of the injection pump, which may be necessary at a later date, we recommend using the holder shown in Fig. 2 (item no. 51.09540-0023). 3 4 39