Repairing water pump Fig. 4 Pull impeller off the pump bearing. For this purpose four M8 threaded bores are pro- vided. 4 Fig. 5 Centre the pump housing on a suitable holder. Use suitable mandrel to press the water pump shaft with bearing out of the housing. The shaft and bearing are encapsulated and are exchanged together only. Take off axial face seal. 5 Assembling water pump Fig. 6 Press in water pump bearing. Use hollow mandrel to press on the outer bearing ring and not on the bearing shaft. Refit circlip. 6 Fig. 7 Press the pump hub on to the bearing shaft so that it fits flush. Use the other shaft end as support. 7 55