Repairing water pump Figs. 8 and 9 Turn water pump housing over. Press in new mechanical seal with press-fitting sleeve (special tool, item 11, page 167) until it stops. Observe installation note for seal on page 58. Note: The seal can be exchanged even without removing the water pump shaft. 8 9 Figs. 10 and 11 Press impeller slowly on to bearing shaft to ensure correct gap. For this purpose an inspection hole closed up with a screw plug (M16 x 1.5) is provided on the bottom of the water pump housing. 1 Impeller 2 Water-pump housing 10 1 2 11 56