MAN — Assembling water pump

Repairing water pump Installation note for mechanical seal: Install mechanical seal while ”wet”, i.e. to install it, coat holding sleeve (1) and water pump shaft (2) with a mixture of either 50 % water and 50 % cleaning spirit or 35 % to 50 % antifreeze agent as per MAN 324 and water. Other lubricants must not be used. Since the seal on collar (4) is coated with sealing paint, no sealing agent must be applied if the location bore in the water pump housing is in faultless condition. If the bore shows even the slightest scores or other minor damage, Dirko-Transparent, part no. 04.10394.9229 is to be applied to the collar.

Place seal with synthetic transport cap on shaft (2) and use installation tool to press it in until the tool con- tacts the housing. Remove synthetic cap. 1 5 4 2 3 Note: Examinations have shown that most cases of damage to the water pump can be attributed to un- suitable coolants. Only the antcorrosion and antifreeze agents expressly approved by MAN Nutz- fahrzeuge AG as per MAN norm 324 (see brochure “Fuels, Lubricants, Coolants for Industrial and Marine Diesel Engines”) guarantee faultless operation. 58