MAN — Removing and installing oil cooler

Removing and installing oil cooler D Drain coolant, see page 49 D Drain engine oil Fig. 1 Remove oil filter (17 mm) and filter head gasket. 1 Fig. 2 Remove oil cooler housing cover with the oil cooler attached (13 mm). The oil cooler is secured by the 5 bolts marked. Loosen these screws only after removal of the housing cover. The picture shows the oil cooler housing cover of a 10-cylinder engine. 2 Fig. 3 12-cylinder engines are equipped with 2 oil coolers secured by a total of 10 bolts. 3 Fig. 4 Check oil cooler for damage, changing it if neces- sary. Fit oil cooler with new gaskets. Fit oil filter with new gasket. Fill up with engine oil and coolant. 4 75