Removing and installing oil pump Removing and installing oil pump Figs. 1 and 2 Drain engine oil from the oil pan and from the oil filters. Use a sufficiently large container to prevent oil from overflowing. Danger: The oil is hot- risk of scalding. Do not touch the oil drain plug with bare fingers. Oil is an environmental hazard. Handle it with care. 1 Caution: Used oil and is classed as dangerous waste and must de disposed of accordingly. Note instructions for preventing environ- mental damage. Fig. 2 Remove oil pan (13 mm). Note: Various oil pan variants are possible. The picture shows a deep oil pan. 2 Fig. 3 Remove oil suction pipe. Note: Various variants are possible.
The picture shows the 10-cylinder engine. Fig. 4 Remove mounting bolts of pressure relief valve (13 mm). The pressure relief valves is encapsulated. Opening pressures see “Engineering S Data S Set- ting values”. 3 4 76