MAN — Removing and installing oil pump

Removing and installing oil pump Disassembling and assembling oil pump Fig. 8 Clamp oil pump in a vice (fitted with soft jaws). Re- move oil pump cover (13 mm). 8 Fig. 9 Pull driven oil pump gears out of the housing. Check gears and pump housing for wear (see “Engineering S Data S Setting values”). 9 Remove oil pump drive gear. To do this, lay pump on suitable support and press off drive gear using a mandrel. Place drive gear on the shaft and press it into place. Thereby support opposite shaft end. Pres- sing force see “Engineering S Data S Setting va- lues”. Fig. 10 10 Fig. 11 Fit cover. Tighten mounting bolts to specified torque. Grind or exchange covers if they are severely worn. 11 78