MAN — Removing and installing oil pump

Removing and installing oil pump Checking axial play of the pump gears Fig. 12 Position dial gauge and push shaft up to the stop in one direction and set dial gauge to “0”. Push shaft in opposite direction and read the movement from the dial gauge. 12 Installing oil pump 2 Fig. 13 Before installing, check whether the oil pump runs smoothly Fit the oil intake lines А with seals and pressure relief valve Б without seal. (13 mm). Before mounting the oil pan, turn over the engine to check whether the crankgear and the oil pumps run unimpeded and smoothly. Stick new oil-pan gasket on to oil pan using grease and then bolt oil pan into place. 1 13 79