Oil spray nozzle Removing oil spray nozzle D Drain engine oil D Remove oil pan, see page 76 Fig. 1 Remove mounting bolts from oil spray nozzle (ar- row) (10 mm). Take off oil spray nozzle with valve. 1 Checking oil spray nozzle valve Fig. 2 Remove oil spray nozzle valve from oil spray nozzle body. It must be possible to move the valve plunger up and down easily. If the plunger sticks, change the oil spray nozzle. For opening pressures, see ”Engineering, Data, Setting values”. 2 Installing oil spray nozzle Fig. 3 Place oil spray nozzle А on oil spray nozzle flange Б Note: Older engines have a seal between the oil spray nozzle flange and the oil spray nozzle.
According to more recent findings these are no longer necessary. 2 3 1 Fig. 4 Tighten mounting bolts to specified torque. Note: In older engines the oil spray nozzles are held in place by two M6 x 25 bolts. In the event of repairs these are to be replaced by M6 x 30 bolts. 4 80