MAN — Removing and installing intake manifold

Removing and installing intake manifold D Drain coolant, see page 49 D Remove heat exchanger, see page 61 D Remove intercooler, see page 102 D Remove injection lines Note: When carrying out work on the intake sy- stem ensure meticulous cleanliness to avoid damage to the engine. Removing intake manifolds 1 Fig. 1 Loosen mounting bolts (13 mm). Fig. 2 Remove intake manifolds. 2 Installing intake manifolds Fig. 3 Place intake manifold with new seals in position. Screw in mounting bolts but do not tighten them yet. 3 Fig. 4 Fit charge-air manifold (17 mm). Only now tighten mounting bolts on the intake pipes to the specified torque. 4 92