MAN — Removing and installing exhaust manifold

Removing and installing exhaust manifold Removing exhaust manifold D Drain coolant, see page 49 D Remove turbocharger, see page 98 Fig. 1 Remove exhaust manifold. 1 Fig. 2 Loosen mounting bolts (17 mm). To remove the right-hand exhaust pipe, the oil filter bowls must be removed (see page 74). Close up oil filter console to prevent dirt or foreign matter from getting into the lube oil circuit. 2 Fig. 3 Take off exhaust manifold. Danger: The exhaust pipe is heavy. Replace two screws by stud bolts as a guide aid if necessary. 3 Fig. 4 In D 2840 LE 403 and D 2842 LE 404 engines the liquid-cooled exhaust pipes are equipped with inner pipes.

These are merely plugged in and can be pulled out with water pump pliers. Note: Inner pipes are designed to reduce the heat transition from the exhaust gas to the liquid−cooled exhaust manifold. 4 93