Starter/Starter DISASSEMBLE SOLENOID DRIVE STARTER 1. Remove nut (A) to disconnect field coil lead. 2. Remove two screws (B). M37150 -UN-25JAN90 M98,2060K,32 -19-05NOV85 3. Remove solenoid switch (A), spring (B), and plunger (C). Clean and inspect parts. Replace solenoid assembly if spring is weak or broken or if other parts are defective. M37129 -UN-25JAN90 M98,2060K,33 -19-05NOV85 NOTE: If bench test indicated solenoid problems, use an ohmmeter or test light to check switch. 4. Touch one probe of tester to field coil terminal and other probe to battery terminal. There should be no continuity.
M37151 -UN-25JAN90 M98,2060K,34 -19-05NOV85 CTM2 (19APR90) 60-15 16, 18, 20 & 24HP Onan Engines AllTractorManuals.com 130495 5. With tester probes still on field coil terminal and battery terminal, push spring loaded switch button (A). There should be continuity when button is pushed in all the way. -UN-25JAN90 M37152 M98,2060K,35 -19-05NOV85 60 15