24. SERVICE PROCEDURE 24.10 EVERY 4000 HOURS SERVICE WARNING Be sure to put a warning tag on work equipment control levers 1 . Maintenance for every 50, 100, 250, 500, 1000 and 2000 hours should be carried out at the same time. 24.10.1 CHECK WATER PUMP Check that there is no play in the pulley, oil leakage, water leakage, or clogging of the drain hole. If any abnormality is found, please contact your Komatsu distributor for disassembly and repair or replacement. 24.10.2 CHECK ENGINE VIBRATION DAMPER Check decrease of damper fluid, dent or out-of-flat. If there is any abnormality, contact your Komatsu distributor for repair.
24.10.3 CHECK FAN PULLEY AND TENSION PULLEY Check the pulley to see if there is any leaking grease. If any abnormality is found, ask your Komatsu distributor to repair or replace it. 24.10.4 CHECK AIRCOMPRESSOR, ADJUST Ask your Komatsu distributor to disassemble and repair or replace. 24.10.5 CHECK INJECTION PUMP RACK RUBBER BOOT, REPLACE Check the injection pump rack rubber boot for cracks and oil leakage. If any abnormality is found, please contact your Komatsu distributor for replacement. 3-85