28. HANDLING AUTO SHIFT SYSTEM 28.1AUTOMATIC SHIFT SYSTEM 28.1.1 METHOD OF OPERATING Automatic gear shifting can be carried out in the 2nd to 3rd speed range of the 3 forward and reverse speeds depending on the travel conditions. Position a : 1st speed Position b : 2nd speed Position c : 3rd speed The range of speeds during automatic gear shifting is deter- mined by the position of the gear shift lever as shown in the chart on the right. If the direction is changed between FORWARD and REVERSE, the transmission automatically starts from 2nd speed. REMARK When the gear shift lever is at position a , the speed is fixed in 1st. Automatic gear shifting is not carried out.
When shifting down from 2nd to 1st, press the kickdown switch on the lift arm control lever. When traveling in any speed range in forward or reverse, if the travel speed is less than 12 km/h (7.4 MPH), the kickdown switch can be actuated to shift down to 1st speed. In this way, it is made easy to carry out load and carry operation. To set to the desired speed range when traveling uphill or downhill, or when carrying out grading, do as follows. When fixing the speed range Press the HOLD switch on the lift arm control lever. The speed range is fixed at the speed range displayed on the transmission indicator on the main monitor.
When shifting up or down from set speed range Shift gear with the gear shift lever. REMARK When the transmission has been shifted down from 2nd to 1st with the kickdown switch, it will shift up from 1st to 2nd when the travel speed increases. 5-4