28. HANDLING AUTO SHIFT SYSTEM 28.2 PRECAUTIONS WHEN CHANGING DIRECTION WARNING When changing direction between FORWARD and REVERSE, check that the new direction of travel is safe. There is a blind spot behind the machine, so be particularly careful when changing direction to travel in reverse. Do not switch between FORWARD and REVERSE when traveling at high speed. When switching between FORWARD and REVERSE, depress the brake to reduce the travel speed sufficiently, then change the direction of travel. (Max. speed for changing direction: 12 km/h (7.5 MPH)) There is no need to stop the machine even when switching between FORWARD and REVERSE. Place directional lever 1 in the desired position.
1. Control for change of travel direction at high travel speed Change of direction between FORWARD and REVERSE at high speed will be lowered the durability of the transmission. If it is attempted to change direction between FORWARD and REVERSE at a travel speed in area in the diagram below, the alarm buzzer will sound for 3 seconds (rapid intermittent sound). If the alarm buzzer sounds, depress the brake immediately to reduce the speed sufficiently, then change direction between FORWARD and REVERSE.
If it is attempted to change direction between FORWARD and REVERSE at a travel speed in area in the diagram below, the alarm buzzer will sound, and at the same time, the controller will change the speed range automatically to maintain the durability. Be careful the deceleration of the vehicle in this range is lower than in ranges and . 5-5