Komatsu — 29.2 STRUCTURE AND FUNCTION OF JOYSTICK STEERING

29. HANDLING JOYSTICK STEERING SYSTEM 1) Change the transmission to the manual mode (ON/OFF) with the manual switch (push-button switch). When the switch is pressed once, the pilot lamp lights up and the system is turned ON; when the switch is pressed again, the pilot lamp goes out and the system is switched OFF. OFF: Automatic gear shifting ON: Gear shifting using transmission control lever, or shift up or shift down switch (joystick steering machine only) 2) When the joystick steering is ON (operated with joystick lever), if the manual switch is turned ON, it is possible to shift the speed range between 1 and 3 with shift up switch 2 or shift down switch 3 as shown in the table below.

When the gear shift lever is at the 2nd or 3rd position, if the speed range is shifted from the 2nd to the 1st with shift down switch and the travel direction is changed between FORWARD and RE- VERSE, the speed range is shifted up from the 1st to the 2nd automatically. The combination of functions for switches 2 and 3 is as shown in the table below. The auto mode of the transmission is effective only when the vehicle is equipped with the automatic shift function (if equipped). 5-10 Gear shift lever position Shift range 1 2 3 a 1st fi b 2nd . fi , / . fi c 3rd . fi , / . . fi , / .

fi Steering Trans- mission Boom lever switch Steering wheel Joystick Auto- matic Manual Automatic Manual Manual switch OFF Manual switch ON Function 2 Hold – Hold Shift up Shift up 3 Kick down Kick down (Only from 2nd) Kick down Shift down Shift down