33. AM/FM CAR RADIO 33.2 METHOD OF USE 1. Turn the ignition key to ACC or ON, and then turn the power 1 of the radio to ON. 2. Set the “BAND” switch 2 to MW(AM) or FM. 3. Select the broadcasting station using the preset switch or the tuning switch 3 . 4. Adjust the volume and tone quality as desired. 5. When turning off the radio, turn the ‡VOL knob to the left until a click sounds. METHOD OF AUTOMATIC TUNING The frequency becomes higher and the receiptable station is picked up, then the selector will automatically stop. METHOD OF MANUAL TUNING The frequency becomes higher by pressing , and becomes lower by pressing of the “TUNING” button.
When keeping the button pressed, the frequency changes sequentially. METHOD OF SETTING PRESET BUTTONS (1) Select the desired station to preset. Select MW (AM) using the “BAND” button, and select FM using “TUNING” button, then select the frequency of the broadcasting. (2) Keep the button at the desired number pressed for 2 seconds. The same number as the button is displayed on the display, and the preset is completed. (3) Repeat the step (1) and (2), and preset the other stations. Similarly, when you want to memory the other station to already preset switch, repeat the steps (1) and (2). If the power supply cuts because of replacing the battery or other reasons, the preset setting is cleared.
Preset the sta- tions again. It is possible to preset 6 stations for AM (MW) and 6 stations for FM. 5-40