33. AM/FM CAR RADIO METHOD OF AUTOMATIC MEMORY The receiptable broadcasting station at your site are called in turn by pressing “ME” button for 2 seconds and they are automati- cally memorized in the preset memory. AUTOMATIC SWITCHING RECEPTION OF MONAURAL/STEREO When the radio wave of receiving FM stereo signal is weak (such as when receiving at the area or the mountainous region that are far from the broadcasting stations), stereo is switched to monaural automatically to decrease the noise. If the stereo broadcasting becomes strong, monaural switches to stereo broadcasting auto- matically. ADJUSTING TIME (1) Turn the ignition key to ACC or ON and the power supply of the radio to ON.
If the frequency is displayed on the display, change the display to the clock using the CLK button. (2) When keeping the “CLK” button pressed and pressing button allows to set time or pressing button allows to set minute. 33.3 PRECAUTIONS WHEN USING Retract the antenna when traveling in places with a low over- head height. For safety reasons, when operating, keep the sound to a level where you can enjoy the sound but still hear the sound from outside vehicles. If water gets inside the speaker case or car radio (auto tuning), it may cause a serious problem, so do not let water get on these parts. Do not wipe the knobs or buttons or any other parts with solvents such as benzene or thinner.
Always wipe with a soft dry cloth (in cases of extreme dirt, use alcohol on the cloth). 5-41