Komatsu — 35.4 ADJUSTMENT OF JOYSTICK CONSOLE

35. HANDLING AJSS (ADVANCED JOYSTICK STEERING SYSTEM) 35.4 ADJUSTMENT OF JOYSTICK CONSOLE ¤ WARNING Stop the machine on level ground in a safe place when carrying out the adjustment. Carry out the adjustment before starting operations or when changing operator shifts. Put your back against the backrest of the operator's seat and adjust the seat so that it is possible to depress the brake fully, then adjust the console. A Adjusting fore-and-aft position of joystick steering Loosen lever q to set the joystick steering to the desired position. After setting it in position, tighten lever q . Fore-and-aft adjustment:

160 mm (6.3 in) B Adjusting height of arm rest Loosen lever w to set the arm rest to the desired position. After setting it in position, tighten lever w . Adjustment range: 50 mm (2.0 in) C Adjusting angle of arm rest Turn knob e to loosen it, then set the arm rest to the desired position. After setting it in position, tighten knob e . Adjustment range: 12 degrees 5-56