35. HANDLING AJSS (ADVANCED JOYSTICK STEERING SYSTEM) 35.5 ADJUSTMENT OF AIR SUSPENSION SEAT (Seat adjustment) ¤ WARNING When adjusting the operator's seat, stop the machine in a safe place. Adjust the seat before starting operations for the day or when changing operators. When adjusting the seat, put your back against the backrest and adjust to a position where the brake pedal can be fully depressed. (Air suspension seat (Manufactured by KAB/SEATING)) A Fore-and-aft adjustment Move lever q up and move the seat to the desired position and release the lever. Fore-and-aft adjustment:
180 mm (10 mm x 18 stages) (7.1 in (0.71 in) x 18 stages) B Adjusting seat angle Move lever w up and push down on the rear of the seat to tilt it backward. Move lever w down and push down on the front of the seat to tilt it forward. Adjustment range: 13 degrees (Front tilt, rear tilt: 4 stages each) C Setting seat for operator's weight Sit on the seat and adjust the strength of the suspension with valve e . Adjustment range: (Target) 50 to 120 kg (110 to 265 lb) Push: suspension becomes stronger Pull: suspension becomes weaker 5-57