35. HANDLING AJSS (ADVANCED JOYSTICK STEERING SYSTEM) D Adjusting reclining angle Move lever q up and move the seat backrest to the front or rear. Push your back against the backrest when carrying out this adjustment. If your back is not pressing against the backrest, the backrest may suddenly spring forward. Adjustment range: Front 66 degrees (3 degrees x 22 stages) Rear 72 degrees (3 degrees x 24 stages) NOTICE If the seat back is reclined too far, the seat back may hit the rear glass, so use it in a position where it does not contact the glass. E Seat height adjustment Move lever w up/down, then move the seat up or down as desired.
Since lever w is also used for adjusting seat angle, set the seat to the desired height while adjusting the angle. Adjustment range: 60 mm (2.4 in) F Adjusting height of headrest Move the headrest up and down to the desired height. Adjustment range: 50 mm (2.0 in) G Adjusting headrest angle Rotate the headrest to the front or rear. H Angle of armrest Adjust angle of armrest by rotating knob t (left side only). Adjustment range: 30 degrees (forward tilt: 25 degrees, back- ward tilt: 5 degrees) Also, when armrest is turned, it will spring up. (Both left and right sides) I Lumbar support Turn grip y to provide suitable support for the lumbar region. 5-58