36. HANDLING MULTI MONITORING SYSTEM 36.2 METHOD OF OPERATING MULTI MONITORING SYSTEM On machines equipped with the multi monitoring system, when the power is turned on, the condition of the various items on the machine is automatically displayed in turn on the multi monitor display. 1. Turn the starting switch to the ON position. The power for the multi monitor is turned on and the display starts to show the condition of the machine. 1) The Komatsu logo is displayed. 2) After 3 seconds, the check before starting is started. The check is started for the fluid levels for 4 items: engine oil level, coolant level, fuel level, and battery electrolyte level. CHECKING is displayed for each item.
3) When the check is completed and GOOD is displayed for each item, the display changes to troubleshooting for the electrical circuit. 4) The troubleshooting is started for the electrical circuits for 3 items: engine oil pressure, brake oil pressure, coolant level. CHECKING is displayed for each item. 5-63