Komatsu — 36.3 SWITCHING MONITOR SCREEN

36. HANDLING MULTI MONITORING SYSTEM 36.3.2 LOAD METER MODE 1. Keep the load meter switch on the panel pressed for at least 2 seconds. Screen 1 is displayed. 2. Each time the load meter switch is kept pressed for at least 2 seconds, the screen will change. There are the following two methods for measuring in the load meter mode, so select the best method to match the type of operation. 1) Aggregate value display measurement method This method is useful for knowing the amount loaded into the dump truck, the amount discharged into the hopper, and the production for half a day or any other period. The data for a maximum of 300 loads can be totaled for one type of work.

2) Remaining value display measurement method This is used for work with a fixed load (overload prevention, allocation of materials). The target production can be set to any amount up to a maximum of 5000 tons. 5-69