36. HANDLING MULTI MONITORING SYSTEM Method for carrying out calibration (0 point adjustment) Carry out calibration with the hydraulic oil temperature and engine speed at the same conditions as actually used during opera- tion (engine speed at rated speed). 1. When using aggregate value display measurement method 1) Press the load meter switch to display screen 2 (calibration) 2) Follow the instructions on the screen: “With no load, tilt bucket fully back, then raise boom.” The buzzer will sound and the screen will switch to screen 1 (aggregate value display). 2.
When using remaining value display measurement method 1) Press the load meter switch to display screen 4 (calibration) 2) Follow the instructions on the screen: “With no load, tilt bucket fully back, then raise boom.” The buzzer will sound and the screen will switch to screen 3 (remaining value display). 5-70