Komatsu — 36.3 SWITCHING MONITOR SCREEN

36. HANDLING MULTI MONITORING SYSTEM 9. After loading the material into the bucket, tilt the bucket fully and raise the boom. The buzzer will sound, and at the same time, the load in the bucket will be displayed in load weight display portion 3 . This load will be subtracted from the previous remaining value in the remaining value display portion, and the result will be displayed as the production amount. 10. If the data that has been weighed is not needed, press the cancel switch on the bucket control lever. The data is canceled and the display returns to the previous measurement.

The data can be canceled using the cancel switch only while the weight of the load in the bucket is being displayed in load weight display 3 (approx. 15 seconds). 5-76