36. HANDLING MULTI MONITORING SYSTEM Method for making initial settings when auto-greasing system is installed If the auto-greasing system is installed, it is unnecessary to set the replacement intervals for the following five items: axle pivot pin, work equipment pin, steering cylinder pin, center hinge pin, and center support. Cancel the unnecessary settings as follows. 1. Press the maintenance switch on the panel to display screen 3 (pin maintenance 1). 2. Press the NEXT/RENEW switch for at least 2 seconds. The color of the numeral for the remaining time for the axle pivot pin will change to yellow and the display will flash. 3. Press the figures, sub-total switch for at least 10 seconds.
The color of the numeral for the remaining time will change to white. 5-83