36. HANDLING MULTI MONITORING SYSTEM 4. Press the NEXT/RENEW switch for at least 2 seconds, and carry out the same operation as in Step 3 for the next items (work equipment pin and steering cylinder pin). 5. Press the maintenance switch on the panel to display screen 4 (pin maintenance 2). 6. Carry out the same operation as in Step 3 for the center hinge pin and center support. 7. Press the NEXT/RENEW switch for at least 2 seconds. The color of the numerals for the 5 set items will change to white, and the color of the numerals for the other items will change to green. 5-84