Komatsu — 37.1 STRUCTURE AND FUNCTION OF AUTOLEVELING,REMOTE POSITIONER

37. HANDLING AUTO-LEVELING, REMOTE POSITIONER Always read this section before using the auto-leveling or re- mote positioner to enable it to be used effectively and safely. 37.1 STRUCTURE AND FUNCTION OF AUTO- LEVELING, REMOTE POSITIONER The auto-leveling and remote positioner system is a system to increase operating efficiency and to reduce operator fatigue. It consists of two functions: the bucket auto- leveler and the lift arm remote positioner. The bucket auto-leveler system makes it easy to keep the bucket at a horizontal position when using the bucket to shake the load out during loading operations.

The remote positioner system makes it possible to set the stop position for the lift arm at the desired position from the operator’s seat, and it is also provided with a modulation function to reduce the shock when stopping the lift arm. The auto-leveling and remote positioner system consists of the auto-leveling and remote positioner switches, controller, sen- sors, and electromagnetic proportional reducing valve. The auto-leveling system has a controller which stores the settings so that the dumping angle (horizontal +15° – 30°) can be set with the lift arm above horizontal by operating the auto mode switch and level set switch.

The electromagnetic proportional reducing valve controls the flow according to the electric signal from the controller. The remote positioner has a controller which stores the settings made when the UP/DOWN selector switch and position set up switch are operated to set the stopping position for the lift arm during raising or lowering operations. The system also makes it possible to reduce the speed and stop when the boom reaches the stop position. The electromagnetic proportional reducing valve controls the flow according to the electric signal from the controller. 5-101