39. HANDLING OF REMOTE POSITIONER 39. HANDLING OF 39.2 METHOD OF OPERATING REMOTE POSITIONER 1. When RAISE/LOWER selector switch is pressed. The system is turned ON, the stop display lamp lights up, and the remote positioner is set to actuation condition. REMRK Each time the RAISE/LOWER selector switch is pressed, the Lifting of the display lamp changes as follows. 1: RAISE ON/LOWER OFF 2. RAISE OFF/LOWER ON 3. RAISE ON/LOWER ON 4. RAISE OFF/LOWER OFF 2. When RAISE stop display lamp 2 is light up, if the lift arm control lever is move from HOLD position A to RAISE position B , the lever stops in that position.
When the lift arm rises to the RAISE stop set position, it reduces speed and stop, and at the same times, the lift arm control lever is return to HOLD position A . 3. When LOWER and stop display lamp 3 is light up, if the lift arm control lever is moved from HOLD position A to FLOAT position c or maximum LOWER position D , and the lift arm goes down to the LOWER stop position, it reduces speed and stops. If the lever is held in position, the lift arm is set to the STOP condition. 5-112