40. HANDLING OF FUEL QUICK CHARGE In addition to filling the fuel tank through the fuel filler, it is also possible to fill it with a quick charge device. WARNING When adding fuel, never let the fuel overflow. This may cause a fire. If any fuel is spilled, wipe it completely. Never bring flames near fuel because it is highly flammable and dangerous. NOTICE If the engine has run out of fuel and has stopped, it is necessary to operate the priming pump to bleed the air completely from the fuel line before starting the engine, after added the fuel. Take care not to let the stop because of lack of fuel.
If the engine has run out of fuel, the air bleeding operation can be carried out more quickly, if the fuel is completely filled with fuel. REMARK When using the quick charge device to fill with fuel, use the special filling device. 1. Turn the engine starting switch to the ON position, then check the fuel level with fuel gauge G . After checking , turn the engine starting switch back to the OFF position. 2. After completing the operation, remove cap 1 of the quick charge device from the filler connector. 3. Connect the special fuel filler hose to the filler connector, then fill with fuel. 4.
Use sight gauge 2 to check the amount of fuel added, and when the fuel surface can be seen in sight gauge 2 stop the filling operation. 5. Install cap 1 to the filler connector. Fuel capacity: 1425 liter (376.2 US gal) 5-114