Doosan GC20SC-5 — Doosan GC20SC-5 User Manual

Maintenance section When Required You must read and understand the warnings and instructions contained in the Safety section of this manual, before performing any operation or maintenance procedures. Operator's Seat, Hood Latch and Support Cylinder - Check, Lubricate Fuses & Relay Change NOTE : If a fuse filament separates, use only the same type and size fuses for replacement. If the filament in a new fuse separates, have the circuits and instruments checked. NOTICE Always replace fuses with ones of the correct ampere rating. Fuse - Protects an electrical circuit from an overload. Opens (filament separates) if an overload occurs. Check the fuses. Use a flashlight, if necessary. 1.

Check the operation of the seat adjuster rod. Make sure that the seat slides freely on its track. Lightly oil the seat slider tracks if necessary. 2. Pull the latch to raise the hood and seat assembly. Make certain the support cylinder will hold the hood open. 3. Lightly oil the hood latch mechanism and the rod for the hood support cylinder. 107