Maintenance section Inspect Coolant Hoses (LP, Dual Fuel Engines Only) Fuel Lines & Fittings - Check 1. Visually inspect coolant hoses and clamps. Remember to check the two coolant lines that connect to the pressure regulator/converter. Visually inspect fuel lines and fittings for physical damage. Replace as required. (1) Fuel line (2) LP mixer (3) Throttle Assembly Inspect Mixer Assembly (G420F(E) Engine Only) 2. Replace any hose that shows signs of swelling, cracking, abrasion or deterioration. 1 2 (1) LP Regulator/Converter (2) Coolant hose LP Regulator/Converter Inspection (LP, Dual Fuel Engine Only) 3 2 1 Refer to the LP mixer section of the engine service manual for procedures.
Inspect Throttle Assembly (G420F(E) Engine Only) 1. Visually inspect the pressure regulator/converter housing for coolant leaks. Refer to the pressure regulator/converter section of the service manual if maintenance is required. 1. Visually inspect the throttle assembly motor housing for coking, cracks and missing cover- retaining clips. Repair and/or replace as necessary. NOTE : Refer to the LP mixer and throttle section of the service manual for procedures on removing the mixer and inspecting the throttle plate. NOTE : For pressure testing and internal inspection of the pressure regulator/converter, refer to the pressure regulator/converter section of the service manual. 133