Doosan GC20SC-5 — Doosan GC20SC-5 User Manual

Maintenance section Every 1500 Service Hours or 9 Months You must read and understand the warnings and instructions contained in the Safety section of this manual, before performing any operation or maintenance procedures. Drive Axle Oil (Shoe Brake) - Change Replace LP Fuel Filter Element (LP-Gas, Dual Fuel Engine Only) “See topic, “Drive Axle Oil - Change” in “First 50 - 100 Service Hours” Inspect Ignition System (LP-Gas, Gasoline & Dual Fuel Engines Only) Park the lift truck in an authorized refueling area with the forks lowered, parking brake applied and the transmission in Neutral. 1. Close the fuel shutoff valve on the LP-Fuel tank.

Run the engine until the fuel in the system runs out and the engine stops. 1. Disconnect Battery Cables. 2. Turn off the ignition switch. 3. Scribe a line across the filter housing covers, which will be used for alignment purposes when re-installing the filter cover. 2. Remove and inspect the spark plugs. Replace as required. 3. Inspect the ignition coil for cracks and heat deterioration. Visually inspect the coil heat sink fins. If any fins are broken replace as required. (1) screws 4. Remove the cover retaining screws (1). 1 G420F(E) Engine 134