Doosan GC20SC-5 — Doosan GC20SC-5 User Manual

Maintenance section Checking the TMAP Sensor (G420F(E) Engine Only) Inspect for Intake Leaks (G420F(E) Engine Only) 1. Verify that the TMAP sensor (F) is mounted tightly into the manifold adapter (E), with no leakage. 2. If the TMAP is found to be loose, remove the TMAP retaining screw and the TMAP sensor from the manifold adapter. 3. Visually inspect the TMAP O-ring seal for damage. Replace as necessary. 4. Apply a thin coat of an approved silicon lubricant to the TMAP o-ring seal. 5. Re-install the TMAP sensor into the manifold adapter and securely tighten the retaining screw. 1.

Visually inspect the intake manifold, throttle assembly (2), and manifold adapters (3), for looseness and leaks. Repair as necessary. Replace PCV Valve and breather element (LP-Gas, Gasoline and Dual Fuel Engines) - Change 1. Loosen the hose clamps and remove the PCV valve. 2. Assemble new PCV valve and hose. 3. Tighten the hose clamps 143